Suzhou Casion International Trading Co., Ltd.

Blow Molding Machine manufacturers / suppliers, offering Blow Molding Machine, Plastic Mould, Blow Molding Machine Accessories, Blow Molding Machine Peripheral Equipment, Blow Molding Machine Auxiliary Machine, Automatic Blow Molding Machine and so on.

About Us

  • 1
  • 2
  • 3
  • 4
  • 5
Suzhou Casion International Trading Co., Ltd.Suzhou Casion International Trading Co., Ltd.Suzhou Casion International Trading Co., Ltd.Suzhou Casion International Trading Co., Ltd.Suzhou Casion International Trading Co., Ltd.
Suzhou Casion International Trading Co., Ltd.
Address: Room510-511,block b,aoyang international building,tangshi street,Yangshe Town,zhangjiagang city., Suzhou, Jiangsu, China
Member Since: 2018
Main Markets: Worldwide

Contact Us

Mobile:
Tel:
Fax:

Mr. Sunny

Contact Us
Recommended Products
New Products
oil buckets Extrusion blow molding machine

Product Description: Characteristics of Blow Moulding Machine  1.The machine adopts human-computer interface to control the whole working procedures, auto-loading, auto blowing, auto dropping. Action cylinders are all assembled with magnetic induction switches.Connect with PLC to control every step and test every cylinder. Next action will continue after the former step done, If former step is not finished, alarm automatically and do not work. PLC displays problem position. 2.Fast speed, accurate position, smooth action. 3.According to special demand, adopt cross double crank pressed clamping, with strong clamping force. Mould open stroke can be adjustable according to the bottle size to save the time.  4.Far infrared heater lamps have strong penetrations , preforms are heated uniformly while rotating, PLC or electronic pressure adjustor controls each group of  temperature  separately. 5.Particular preheater design makes preform close while heating. Change space, shorten heating tunnel and reduce energy consumption according to the bottle size while blowing. 6.The air supply system consists of slight blow, high pressure blow, low pressure actions, to supply enough air for different products. 7.Special recycling installation for high pressure air reduce the energy consumption. 8.Operation consists of manual and automatic procedure, manual operation for assembly and test, automatic operation for production. 9.Production workmanship process is fully automatic to make best quality and pollution-free. it holds less investment, high efficiency, easy operation, simple repair, safety etc. Large Multi Layerbucket Blow Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers blow moulding machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.     2Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 32 43 49 60 Machine Dimension(L*W*H) M 7*6.5*5 8*7*6.5 9*8*7.5 11*7*7.5 Total Power Kw 196 277 327 482 Average Power Consumption Kw 127 180 212 313 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 10 12 12 Power of Die Heating Kw 55 80 100 120 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/100 120/120 130/130 150/150 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 8 10 10 12 Heating Power Kw 44 55 55 72 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 30/30 45/45 55/55 110/110 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100       3Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 38 48 59 75 Machine Dimension(L*W*H) M 7*7.5*5.5 8*8*6.5 9*7*7.5 10*8*7.5 Total Power Kw 287 336 417 526 Average Power Consumption Kw 186 218 271 341 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 11 13 16 Power of Die Heating Kw 88 100 130 160 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/110/100 110/120/110 120/130/120 130/138/130 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 13 13 15 16 Heating Power Kw 65 65 80 96 Max. Melting Capacity KG/Hr. 370 470 540 600 Extruder Motor Power Kw 30/30/37 37/37/45 45/45/45 55/55/90 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100     4Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 44 60 70 85 Machine Dimension(L*W*H) M 9*7.5*5.5 10*8*6.5 11*8*7.5 12*8*8 Total Power Kw 351 441 532 630 Average Power Consumption Kw 228 286 346 409 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 12 14 16 18 Power of Die Heating Kw 12 140 160 180 Max. Die-pin Diameter mm 450 600 800 850 Extruder Unit           Screw Diameter mm 90/100/100/90 100/110/110/100 110/120/120/110 120/130/130/120 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 18 18 20 20 Heating Power Kw 90 99 110 120 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 22/22/30/30 30/30/45/45 45/45/55/55 55/55/75/75 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100  

Extrusion Blow Molding Machine chemical revolving barrel

Product Description: Features of Semi Automatic Blow Molding Machine This semi automatic blow molding machine is a latest blow molding machine. All the components of this semi automatic blow molding machine are controlled by computer and pneumatic transmission. It is of high precision of time delay, reliable operation, strong resistance against disturbance, easy time setting and long service life. It has a digital automatic temperature adjusting instrument and carries out two operation modes: single action and semi-automation. This semi automatic blow molding machine adopts far infrared heating oven, which fast and equally heats the bottles. Electro thermal lamps are controlled by bicolor LED digital controlled silicon.  1.Adopt special electronic controlling circuit for heating; high efficiency in simultaneous controlling one lamp or more; lower power consumption.  2.Adopt the theory of heat transfer and feedback while designing the shape and thikness of preform. 3.The preform will be heated evenly, not be influenced by outside environment.  4.Cooling system with cold air cycle ensures same heat exposure of internal and external surface of the bottles 5.The air exhaust system designed by CAD can guarantee the deviation of heating furance temperature +/-1 degree.  6.Air circuit system consists of movement and blowing so as to meet the needs of different air pressure, also to provide stable high pressure for blowing different shapes of big capacity bottles.  7.The system is equipped with silencer, connecting rod and articulated refueling devices. 8.Two modes of operation: semi-automatic mode and automatic mode. 9.Small size, low investment. one person enough to operate, simple and safe. IBC Barreol Blw Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers blow moulding machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.   Specification   Double L-ring IBC Max container capacity L 235 1000 Machine Weight T 21 30 Machine Dimension(L*W*H) M 7*6*5 7*6*5.5 Total Power Kw 222 326 Average Power Consumption Kw 144 212 Die Head       Accumulator Volume KG 16 50 Number of Heating Zone Zone 5 6 Power of Die Heating Kw 40 50 Max. Die-pin Diameter mm 250 600 Extruder Unit       Screw Diameter mm 125 120/120 Screw L/D Ratio L/D 28/1 28/1 Number of Heating Zone Zone 5 8 Heating Power Kw 27.5 44 Max. Melting Capacity KG/Hr. 300 500 Extruder Motor Power Kw 110 90/90 Clamping Unit       Max. Mould Size(W*H) mm 1200*1500 1200*1500 Distance Between Platen mm 800~2400 800~2400 Platen Size(W*H) mm 1450*1500 1450*1500 Clamping Force KN 800 1200 Hydraulic System       Main Oil Pump Power Kw 30 45 Servo Oil Pump Power Kw 7.5 7.5 Thickness Controll System Point 100 100    

IBC multilayer barrels and analogous plastic hollow products

Product Description: Technology advantage: 1.Special design,high rigid compound die structure 2.Wide adaptability, suitable for every type Plastic Mould thickness 3.Adjust convenience 4.No mould rolling out 5.More energy conservation,no need much air supply 6.High burnish principal axis, with very precise polishing, light action and low noise. 7.Short mould stroke,quick action 8.All casting, with long timing process,very small transformation,can meet your precise request 100% 9.Hig dead-weigh, ensure the steady during the opeartion IBC Barreol Blw Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers Plastic Blow Molding Machine,2000L one-three layers Water Tank Blow Moulding Machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.   Specification   Double L-ring IBC Max container capacity L 235 1000 Machine Weight T 21 30 Machine Dimension(L*W*H) M 7*6*5 7*6*5.5 Total Power Kw 222 326 Average Power Consumption Kw 144 212 Die Head       Accumulator Volume KG 16 50 Number of Heating Zone Zone 5 6 Power of Die Heating Kw 40 50 Max. Die-pin Diameter mm 250 600 Extruder Unit       Screw Diameter mm 125 120/120 Screw L/D Ratio L/D 28/1 28/1 Number of Heating Zone Zone 5 8 Heating Power Kw 27.5 44 Max. Melting Capacity KG/Hr. 300 500 Extruder Motor Power Kw 110 90/90 Clamping Unit       Max. Mould Size(W*H) mm 1200*1500 1200*1500 Distance Between Platen mm 800~2400 800~2400 Platen Size(W*H) mm 1450*1500 1450*1500 Clamping Force KN 800 1200 Hydraulic System       Main Oil Pump Power Kw 30 45 Servo Oil Pump Power Kw 7.5 7.5 Thickness Controll System Point 100 100    

Plastic Water Horse Fence Blow Molding Machine

Product Description: 1). Stable performance with advanced PLC. 2). Automatic preform conveyer to save human cost. 3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production. 4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable. 5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure. 6). Introduce the air cylinder to avoid contamination and noise. 7). Satisfaction with different atmospheric pressure for Ibc Blowing Machine and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. 8). Strong clamping force with high pressure and double crank links to lock the mould. 9). Two ways of operating: automatic and manual. 10). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand. 11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process. 12). Ideal cooling system make the finished bottles without any flaws. 13). Easy for you to install\test and start up. 14). Low rejection rate: less than 0.2 percent Large Multi Layer bucket Blow Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers Blow Moulding Machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.     2Layers Extrusion Blow Moulding Machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 32 43 49 60 Machine Dimension(L*W*H) M 7*6.5*5 8*7*6.5 9*8*7.5 11*7*7.5 Total Power Kw 196 277 327 482 Average Power Consumption Kw 127 180 212 313 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 10 12 12 Power of Die Heating Kw 55 80 100 120 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/100 120/120 130/130 150/150 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 8 10 10 12 Heating Power Kw 44 55 55 72 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 30/30 45/45 55/55 110/110 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100       3Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 38 48 59 75 Machine Dimension(L*W*H) M 7*7.5*5.5 8*8*6.5 9*7*7.5 10*8*7.5 Total Power Kw 287 336 417 526 Average Power Consumption Kw 186 218 271 341 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 11 13 16 Power of Die Heating Kw 88 100 130 160 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/110/100 110/120/110 120/130/120 130/138/130 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 13 13 15 16 Heating Power Kw 65 65 80 96 Max. Melting Capacity KG/Hr. 370 470 540 600 Extruder Motor Power Kw 30/30/37 37/37/45 45/45/45 55/55/90 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100     4Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 44 60 70 85 Machine Dimension(L*W*H) M 9*7.5*5.5 10*8*6.5 11*8*7.5 12*8*8 Total Power Kw 351 441 532 630 Average Power Consumption Kw 228 286 346 409 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 12 14 16 18 Power of Die Heating Kw 12 140 160 180 Max. Die-pin Diameter mm 450 600 800 850 Extruder Unit           Screw Diameter mm 90/100/100/90 100/110/110/100 110/120/120/110 120/130/130/120 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 18 18 20 20 Heating Power Kw 90 99 110 120 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 22/22/30/30 30/30/45/45 45/45/55/55 55/55/75/75 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100  

Automatic barrel blow molding making machine

Product Description: Specification semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 20-25L. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. 1.Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.  2.The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for Ibc Blowing Machine large irregular shaped bottles.  3.The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.  4.The machine can be operated in the step-by-step mode and the semi-auto mode.  5.The machine is small with low investment, easy and safe to operate . IBC Barreol Blw Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers Water Tank Blow Moulding Machine,2000L one-three layers Pe Blow Moulding Machine Parts.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.   Specification   Double L-ring IBC Max container capacity L 235 1000 Machine Weight T 21 30 Machine Dimension(L*W*H) M 7*6*5 7*6*5.5 Total Power Kw 222 326 Average Power Consumption Kw 144 212 Die Head       Accumulator Volume KG 16 50 Number of Heating Zone Zone 5 6 Power of Die Heating Kw 40 50 Max. Die-pin Diameter mm 250 600 Extruder Unit       Screw Diameter mm 125 120/120 Screw L/D Ratio L/D 28/1 28/1 Number of Heating Zone Zone 5 8 Heating Power Kw 27.5 44 Max. Melting Capacity KG/Hr. 300 500 Extruder Motor Power Kw 110 90/90 Clamping Unit       Max. Mould Size(W*H) mm 1200*1500 1200*1500 Distance Between Platen mm 800~2400 800~2400 Platen Size(W*H) mm 1450*1500 1450*1500 Clamping Force KN 800 1200 Hydraulic System       Main Oil Pump Power Kw 30 45 Servo Oil Pump Power Kw 7.5 7.5 Thickness Controll System Point 100 100    

Blow Molding Machine for Making Plastic Bottle

Product Description: Automatic PET Bottle Making Machine/ PET Bottle Blow Moulding Machine / PET Bottle Blower 1. High speed with high efficiency. 2. Labour saving, one person is enough for operation the machine. 3. Stable performing with easy maintaining. 4. Siemens PLC and touch screen controller and man-machine interface computer. 5. Japan Omron inspection sensor. 6. Adopts the new type double bend arm and four pull rod-clamping structure (won the patent): Cross direction, Middle mould board is move parallel. The distance between two mold boards is adjusted by the chain wheel. Thus, the clamping force is very strong. Power saving design can increase your profits. 7. Segregate type air controlling system, which is designed for avoiding waste pollution. Large Multi Layerbucket Blow Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers blow moulding machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.     2Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 32 43 49 60 Machine Dimension(L*W*H) M 7*6.5*5 8*7*6.5 9*8*7.5 11*7*7.5 Total Power Kw 196 277 327 482 Average Power Consumption Kw 127 180 212 313 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 10 12 12 Power of Die Heating Kw 55 80 100 120 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/100 120/120 130/130 150/150 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 8 10 10 12 Heating Power Kw 44 55 55 72 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 30/30 45/45 55/55 110/110 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100       3Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 38 48 59 75 Machine Dimension(L*W*H) M 7*7.5*5.5 8*8*6.5 9*7*7.5 10*8*7.5 Total Power Kw 287 336 417 526 Average Power Consumption Kw 186 218 271 341 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 11 13 16 Power of Die Heating Kw 88 100 130 160 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/110/100 110/120/110 120/130/120 130/138/130 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 13 13 15 16 Heating Power Kw 65 65 80 96 Max. Melting Capacity KG/Hr. 370 470 540 600 Extruder Motor Power Kw 30/30/37 37/37/45 45/45/45 55/55/90 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100     4Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 44 60 70 85 Machine Dimension(L*W*H) M 9*7.5*5.5 10*8*6.5 11*8*7.5 12*8*8 Total Power Kw 351 441 532 630 Average Power Consumption Kw 228 286 346 409 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 12 14 16 18 Power of Die Heating Kw 12 140 160 180 Max. Die-pin Diameter mm 450 600 800 850 Extruder Unit           Screw Diameter mm 90/100/100/90 100/110/110/100 110/120/120/110 120/130/130/120 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 18 18 20 20 Heating Power Kw 90 99 110 120 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 22/22/30/30 30/30/45/45 45/45/55/55 55/55/75/75 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100  

Large Multi Layerbucket Blow Molding Machine

Product Description: ADVANTAGES 1.The temperature controlled by Seimens PLC,the extruder stops automatically if the temperature is down because of heater or thermocouples damaged. 2.There is die head pressure testing in the diehead.The PLC shots down the extruders if the pressure inside the die head is too high. 3.The extruders have covers for keeping the temperature, so can make the heating time short 4.The temperature are controlled by Siemens brand. 5.The extrusion motor is Siemens brand. 6.The inverter is Seimens brand 7.More protection in control system Large Multi Layerbucket Blow Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers Water Tank Blow Moulding Machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.     2Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 32 43 49 60 Machine Dimension(L*W*H) M 7*6.5*5 8*7*6.5 9*8*7.5 11*7*7.5 Total Power Kw 196 277 327 482 Average Power Consumption Kw 127 180 212 313 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 10 12 12 Power of Die Heating Kw 55 80 100 120 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/100 120/120 130/130 150/150 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 8 10 10 12 Heating Power Kw 44 55 55 72 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 30/30 45/45 55/55 110/110 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100       3Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 38 48 59 75 Machine Dimension(L*W*H) M 7*7.5*5.5 8*8*6.5 9*7*7.5 10*8*7.5 Total Power Kw 287 336 417 526 Average Power Consumption Kw 186 218 271 341 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 11 11 13 16 Power of Die Heating Kw 88 100 130 160 Max. Die-pin Diameter mm 450 600 800 820 Extruder Unit           Screw Diameter mm 100/110/100 110/120/110 120/130/120 130/138/130 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 13 13 15 16 Heating Power Kw 65 65 80 96 Max. Melting Capacity KG/Hr. 370 470 540 600 Extruder Motor Power Kw 30/30/37 37/37/45 45/45/45 55/55/90 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100     4Layers blow moulding machine Specification   1000L 2000L 3000L 5000L Max container capacity L 1000 2000 3000 5000 Machine Weight T 44 60 70 85 Machine Dimension(L*W*H) M 9*7.5*5.5 10*8*6.5 11*8*7.5 12*8*8 Total Power Kw 351 441 532 630 Average Power Consumption Kw 228 286 346 409 Die Head           Accumulator Volume KG 35 60 80 150 Number of Heating Zone Zone 12 14 16 18 Power of Die Heating Kw 12 140 160 180 Max. Die-pin Diameter mm 450 600 800 850 Extruder Unit           Screw Diameter mm 90/100/100/90 100/110/110/100 110/120/120/110 120/130/130/120 Screw L/D Ratio L/D 25/1 25/1 25/1 25/1 Number of Heating Zone Zone 18 18 20 20 Heating Power Kw 90 99 110 120 Max. Melting Capacity KG/Hr. 370 470 540 670 Extruder Motor Power Kw 22/22/30/30 30/30/45/45 45/45/55/55 55/55/75/75 Clamping Unit           Max. Mould Size(W*H) mm 1200*1500 1500*2000 1700*2200 2000*2400 Distance Between Platen mm 800~2400 1000~3000 1200~3400 1300~3600 Platen Size(W*H) mm 1500*1500 1800*2000 2000*2200 2200*2400 Clamping Force KN 800 1200 1200 1800 Hydraulic System           Main Oil Pump Power Kw 30 45 55 55 Servo Oil Pump Power Kw 7.5 7.5 7.5 15 Thickness Controll System Point 100 100 100 100  

IBC Barrel Blow Molding Machine

Product Description: Specification:: HY-Y blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm. ● Perfect function with economic investment. ● Small size and compact construction with no space waste. ● Easy to operate and maintain ,operation by one person . ● Saving power and uneasy to worn out ,Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system. IBC Barreol Blw Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers Pe Blow Moulding Machine Parts.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.   Specification   Double L-ring IBC Max container capacity L 235 1000 Machine Weight T 21 30 Machine Dimension(L*W*H) M 7*6*5 7*6*5.5 Total Power Kw 222 326 Average Power Consumption Kw 144 212 Die Head       Accumulator Volume KG 16 50 Number of Heating Zone Zone 5 6 Power of Die Heating Kw 40 50 Max. Die-pin Diameter mm 250 600 Extruder Unit       Screw Diameter mm 125 120/120 Screw L/D Ratio L/D 28/1 28/1 Number of Heating Zone Zone 5 8 Heating Power Kw 27.5 44 Max. Melting Capacity KG/Hr. 300 500 Extruder Motor Power Kw 110 90/90 Clamping Unit       Max. Mould Size(W*H) mm 1200*1500 1200*1500 Distance Between Platen mm 800~2400 800~2400 Platen Size(W*H) mm 1450*1500 1450*1500 Clamping Force KN 800 1200 Hydraulic System       Main Oil Pump Power Kw 30 45 Servo Oil Pump Power Kw 7.5 7.5 Thickness Controll System Point 100 100    

Automatic Blow Molding Machine for 1000L Plastic Bucket

Product Description: Chemical Bucket Blow Molding Machine We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers blow moulding machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 100L-260L,upto 2layers. TP260 blow molding machine is large size for 200-220L Single /Double ring drum Standard 220L drum is 9.5-11KG , With high production Per hour. 1.Latest technology die head from Germany NO LEAKAGE and best evenness of wall thickness. 2.We haveSIEMENS temperature-control moudules to keep the cool temperature. 3.Latest Mold Change System, much faster and easier than limit switch. 4.We are using Servo Driver Motor from Germany. 5.All the main parts of the machine we use double lock technology which can assure the locking system of Bottle Blow Molding Machine Parts.   Technical Specification Max.product Volume ( L ) 260 Screw Diameter (mm) 120 Screw L / D ratio (L/D) 24-28 Screw drive power (KW) 37-75 Screw Heating capacity (KW) 18-24 Extruder DC motor Power (KW) 135 NO.of heating zone (zone) 4-8 Output of HDPE (kg/h) 250-380 Oil pump drive power (KW) 37 Clamping force (KN) 780 Platen distance (mm) 900-1750 Max.Size of Mold ( WxH ) 1200x1500 Capacity ( L ) 25 Max.Die diameter (mm) 350-600 Die heat capacity (KW) 55 NO.of heating zone (zone) 8 Blowing pressure (Mpa) 1.0 Alr volume (m3/min) 1.2 Cooling water pressure (Mpa) 0.4 Water consumption (L/min) 120 Total Power (KW) 260 Size of machine (LxWxH)m 7.2x2.9x5.8 Weight of machine (TON) 35 Dry cycle (pc/h) 350 )

Lubricant Blow Molding Machine

Product Description: EXTRUSION UNIT Screw mode: Gradually changed screw with same distance and different deep; Diameter of screw:100mm,L/D:24/1; Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2; Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2; Drive mode: American AMERSON converter instrument + Hard gear surface decelerator; Drive power: 75KW; Plasticizing capacity: 180Kg/hr; Temperature controlling: Adopt GEFRAN automatic temperature control. Temperature controlling precision: Various ±1%; Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel; Heating power: 21.4KW; Zones of heating: 4 zones; Mode of cold: Automatic blowing, three blowers. Power: 90W×4; Lubricant Blow Molding Machine/Blow Moulding Machine We are specializing in large blow moulding machine from 1-10000L,1-3layers,1000L one-three layers Water Tank Blow Moulding Machine,2000L one-three layers Pet Blow Moulding Machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 0.5L-30L,upto 1-3layers.       Technical Specification/ 5-10L, 10-25L Max.product Volume ( L ) 30 Screw Diameter (mm) 90 Screw L / D ratio (L/D) 25 Screw drive power (KW) 37 Screw Heating capacity (KW) 16 Extruder DC motor Power (KW) 55 NO.of heating zone (zone) 4 Output of HDPE (kg/h) 150-200 Oil pump drive power (KW) 18.5 Clamping force (KN) 270 Platen distance (mm) 200-660 Max.Size of Mold ( WxH ) 450x660 Capacity ( L ) --- Max.Die diameter (mm) 200 Die heat capacity(Single) (KW) 12 NO.of heating zone (zone) 4 Central distance of  bi-die (mm) 100-270 Max.Die diameter  bi-head (mm) 180 NO.of heating zone (zone) 8 Heating capacity (KW) 18 Cooling water pressure (Mpa) 0.4 Water consumption (L/min) 80 Total Power (KW) 65 Size of machine (LxWxH)m 5x3.5x2.8 Weight of machine (TON) 12 Dry cycle (pc/h) 600    

Shaped Works Blow Molding Machine

Product Description: Extrusion blow molding machine technical feature: The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable. The hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable. The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform. The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable. The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.  Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision products. We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers blow moulding machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products. With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 100L-500L,upto 2 -6layers. Use to produce six-layers oil tank etc. KHX-500×6 applicable to produce six-layer plastic fuel tanks of high separation capacity and complex shape with HMWHDPE as base layer, EVOH or PA as function layer, and also produce various blow molded products of high separation capacity. Max. Volume of the products is 500L. SCJC200×6 use to produce various multilayer plastic fuel tanks, and the Max. Volume of the products is 100L.It`s completely meeting the current marketing requirements for fuel tanks with 55L-88L of top grade limousine. Product Tag    Shaped Works Blow Molding Machine(Shaped Works Blow Molding Machine)

Daily Washing Blow Molding Machine

Product Description: The machine has three modes of operation: manual, semi automatic and fully automatic. Safety system: electric, mechanical and interlocking safety devices are adopted to make the operation and maintenance safe and reliable. Bending die locking: low energy consumption, large clamping force, stable central locking and stable operation. KHX-KS65UF2x4-500ml Technical Data for Blow Molding/Blow Moulding   KHX-KS65UF2x4-1000ml 1. General Issues Machine operating manual including Hydraulic, Pneumatic, Assembly drawing, Cooling water. Max. volume of product: single cavity 500mL Total weight 12 ton 3.5-4.5bars Max. output 600pcs/h (250mL product net weight 30-50g,Sufficient cooling water temperature at 8℃ with an intake pressure of between 3.5 to 4.5 bars, with a Min. difference between intake and outlet of 3 bars. ) 2. Clamping Unit Principle: bi-direction synchronous clamping device with double axis. Linear roller guidance horizontal. Clamping force: 150KN Mold platens H x W 400 x 500 mm Distance between the p;atens: 150-550mm Clamping unit stroke: 300mm 3. Die Head Type of die head: Double lays head of accumulator. Max mouth diameter: 8- 30MM Max. Storage volume: Type of temperature sensors: K Heater power: 15KW 100 point WPS systerm controller (B&R) or   MOOG 100 poing 4. Extruder System Extruder should be adequate to work with HDPE Screw diameter: 65-75/30D Nitride treatment barrel and screw. Plasticizing efficiency: 80-100 kg/h (HDPE) Feeding zone grooved with cooling water Cast-aluminium heater, adopt European mode of connection Type of temperature sensors: DC motor drive: 15KW Cooling by 5 cooling fans. Raw material hopper with a window. 5.Blow System Blow system mounted on linear guide under the mold. Height adjustment mechainsm 150 mm Blow pin up/down stroke: 150 mm , controlled by hydraulic cylinder Parison closed Mechanical adjustment for left and right 6. Take out system Take out stroke 400 mm Adopt lear guide and synchronous belt transmission of motor to advance and retreat Gripper with the function: auto cooling water 7. Hydraulic System Hydraulic working pressure 100 -150 bar Hydraulic system servo pump : 80 L/min Hydraulic valves:Yuken brand Oil Temperature sensor showing the screen Motor power: 7.5-15 KW Servo system Servo valve: (REXROTH--From Germany) Servo oil source:4KW Piston pump:YUken (YUKEN--From Japan) Threads of hydraulic block use of screw joint GE(ISO 1179) 8. Pneumatic System Pneumatic cylinders AIRTEC Pneumatic valves AIRTEC Max. pressure of all components: 10 bar Max. pressure of gauge: 6-8bar 9.Control System Control System:Moog Servo WDS control system: Moog 100point. Full color 12.4" Full color 12.4" screen. Recipe and machine data storage on memory stick (CF) Emergency stop push buttons (rotationally release) without key All electric components needs to be for power supply 220V/380V, 50Hz, controller DC24V, Total rated power: 76 KW Average energy consumption: 22-30 KW Main components (Air switch, Contactor) :Schneider intermediate relay: Schneider Invertot of extuder motor: PARK Linear transducer: Gefran Proximity switch: Schneider Cooling water All pipes for cooling water made of rubber material. Separate Water Cooling Chiller circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling. Water consumptions: 10m3/h 11.Machine frame Clamping unit should be forward: 600 mm, for mold changing Aluminum profiles for safety doors, with plastic window. Machine color: according requirement of customer Overall dimensions of machine LxWxH: 2.8 x 3.2x 3.0 m

Food Beverage Packaging Blow Molding Machine

Product Description: Technical Data for Blow Molding KHX-KS55UF2x6-500ml 1. General Issues Machine operating manual including Hydraulic, Pneumatic, Assembly drawing, Water Cooling Chiller. Max. volume of product single cavity 500mL Total weight 8 ton 3.5-4.5bars Max. output 600pcsh (250mL product net weight 30-50g,Sufficient cooling water temperature at 8℃ with an intake pressure of between 3.5 to 4.5 bars, with a Min. difference between intake and outlet of 3 bars. ) 2. Clamping Unit Principle bi-direction synchronous clamping device with double axis. Linear roller guidance horizontal. Clamping force 150KN Mold platens H x W 400 x 500 mm Distance between the p;atens 150-550mm Clamping unit stroke 300mm 3. Die Head Type of die head Double lays head of accumulator. Max mouth diameter 8- 20MM Max. Storage volume   Type of temperature sensors K Heater power 12KW 100 point WPS systerm controller (B&R) or   MOOG 100 poing  4. Extruder System Extruder should be adequate to work with HDPE Screw diameter 55-6530D Nitride treatment barrel and screw. Plasticizing efficiency 80-100 kgh (HDPE) Feeding zone grooved with cooling water Cast-aluminium heater, adopt European mode of connection Type of temperature sensors DC motor drive 13KW Cooling by 5 cooling fans. Raw material hopper with a window. 5.Blow System Blow system mounted on linear guide under the mold. Height adjustment mechainsm 150 mm Blow pin updown stroke 150 mm , controlled by hydraulic cylinder Parison closed Mechanical adjustment for left and right 6. Take out system Take out stroke 400 mm Adopt lear guide and synchronous belt transmission of motor to advance and retreat Gripper with the function auto cooling water 7. Hydraulic System Hydraulic working pressure 100 -150 bar Hydraulic system servo pump  60 Lmin Hydraulic valvesYuken brand Oil Temperature sensor showing the screen Motor power 5.5-11 KW Servo system Servo valve (REXROTH--From Germany) Servo oil source4KW Piston pumpYUken (YUKEN--From Japan) Threads of hydraulic block use of screw joint GE(ISO 1179) 8. Pneumatic System Pneumatic cylinders AIRTEC Pneumatic valves AIRTEC Max. pressure of all components 10 bar Max. pressure of gauge 6-8bar 9.Control System Control SystemMoog Servo WDS control system  Moog 100point. Full color 12.4" Full color 12.4" screen. Recipe and machine data storage on memory stick (CF) Emergency stop push buttons (rotationally release) without key All electric components needs to be for power supply 220V380V, 50Hz, controller DC24V, Total rated power 76 KW Average energy consumption 22-30 KW Main components (Air switch, Contactor) :Schneider intermediate relay Schneider Invertot of extuder motor PARK Linear transducer Gefran Proximity switch Schneider Cooling water All pipes for cooling water made of rubber material. Separate cooling water circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling. Water consumptions 10m3h 11.Machine frame Clamping unit should be forward 600 mm, for mold changing Aluminum profiles for safety doors, with plastic window. Machine color according requirement of customer Overall dimensions of machine LxWxH 2.8 x 2.2x 2.6 m

Plastic Bottle Extrusion Blow Mold

Product Description: 0.5ml~1000ml Bottle Blowing Mould   ●Technical Specifications:   Item Description Mould Type 0.5ml~1000ml Bottle Blowing Mould Cavity No.: Single or Multi Scope of Application Food Bottles,Beverage bottles,Chemical bottle,Seasoning Bottle,Pesticide Bottle Mould Material S45C,S50C,P20,3Cr13,718H,NAK80/magnalium Products Material PP,PE Specification According to customer's requirements. Design & program softwares CAD/CAM/CAE,UG,PRO/E,Cimatron,Powermill,Solidworks,Catia,etc. Package wooden case Delivery time 30~35 days Payment Terms: T/T or L/C After-sales Services: Experienced engineers will provide all-round technical solutions to any problems occurred in customers mould operation.      ●Technical Specifications: Item Description Mould Type 2~5 gallon Barrel Mould Cavity No.: Single Mould Material S45C,S50C,,P20,3Cr13,718H,NAK80/magnalium Products Material PE,PC,PET Specification According to customer's requirements. Design & program softwares CAD/CAM/CAE,UG,PRO/E,Cimatron,Powermill,Solidworks,Catia,etc. Package wooden case Delivery time 30~35 days Payment Terms: T/T or L/C After-sales Services: Experienced engineers will provide all-round technical solutions to any problems occurred in customers mould operation. ● Technical Specifications:  Item Description Mould Type Water Purifier Inner-container Mould Water Purifier Capacity 5L~1000L Cavity No.: Single Mould Material S45C,S50C,,P20,3Cr13,718H,NAK80/magnalium/Cast Aluminium Products Material PE,PP Specification According to customer's requirements. Design & program softwares CAD/CAM/CAE,UG,PRO/E,Cimatron,Powermill,Solidworks,Catia,etc. Package wooden case Delivery time 30~35 days Payment Terms: T/T or L/C After-sales Services: Experienced engineers will provide all-round technical solutions to any problems occurred in customers mould operation.   ● Technical Specifications: Item Description Mould Type Toy Mould Cavity No.: Single or Multi Mould Material S45C,S50C,,P20,3Cr13,718H,NAK80/magnalium Products Material PE,PC Specification According to customer's requirements. Design & program softwares CAD/CAM/CAE,UG,PRO/E,Cimatron,Powermill,Solidworks,Catia,etc. Package wooden case Delivery time 30~35 days Payment Terms: T/T or L/C After-sales Services: Experienced engineers will provide all-round technical solutions to any problems occurred in customers mould operation. ●Technical Specifications: Item Description Mould Type 1000L~5000L IBC TANK Mould Cavity No.: Single Mould Material Cast Aluminium etc..(For Reference) Products Material HDPE Specification According to customer's requirements. Design & program softwares CAD/CAM/CAE,UG,PRO/E,Cimatron,Powermill,Solidworks,Catia,etc. Machines   Package wooden case Delivery time 30~35 days Payment Terms: T/T or L/C After-sales Services: Experienced engineers will provide all-round technical solutions to any problems occurred in customers mould operation. Plastic Mould description:  1)Material: HDPE  2)Mould material: Steel1045,P20,Cr12,DC53,H13 etc   3)Surface Finish: chrome plating,silk-printing,texture,color painting etc    4)Injection machine production ability: from 0.1g to 6000g  5)The product in the pictures are our customers' OEM products,it's only for reference As a professional manufacturer, our range products are covered from sanitary ware,household appliances, medical appliance, electronic, automobile, and so on. About our Quick Mold Change System department, we have professional designers and experienced technicians. We are using 2D or 3D software to design drawings for our customers. With advanced molding technology, wire cutting machines, and CNC manufacturing centers,we can develop high quality moulds.  The capacity of our mold department can produce 400-500 Mold System per year up to the tool sizes. About our plastic injection department, we have 15 precision injection machines, range from 50T to 380T, and able to deal with general plastic, engineering plastic and the special material according to our customer`s requests.     

Plastic Chair Making Machine/Blow Moulding Machine

Product Description: Automatic Blow Molding Machine Brand : KHX-MACHINE small bottle automatic pet blow molding machine A,Adopted advanced MCU control system, stable performance B,Conveyor automatic feeding preform C,Adopt infrared tubes heating, strong penetrating power, bottle preform rotation heating, circle revolution, heated evenly, fast and reliable. D,The tubes of heating zone, reflex plate width and height can be adjusted to suit different structure of preform heating, and has automatic device of vent temperature, to ensure that constant temperature. E,Each mechanical movement had safety self-lock device, when a process malfunction, the program will automatically switch to safe state F,Each movement driven by cylinder, do not use oil pump, no pollution, low noise etc advantage, G,The pneumatic system divide into action and blowing two parts, to satisfy the bottle blowing and action different pressure demand KHX-260-120 Technical Data for Injection Blow Molding Machine KHX-260-120 1. General Issues Machineoperating manual including Hydraulic, Pneumatic, Assembly drawing, Coolingwater. Max.volume of product: single cavity 260L Total weight 35 ton 3.5-4.5bars Max. output 20pcs/h (220L product net weight 10.5Kg,Sufficientcooling water temperature at 8℃ with an intake pressure of between3.5 to 4.5 bars, with a Min. difference between intake and outlet of 3 bars. )   2. Clamping Unit Principle: bi-direction synchronous clampingdevice with double axis. Linearroller guidance horizontal. Clampingforce:  750KN Moldplatens H x W 1500 x 1000 mm Distancebetween the p;atens: 750-1750mm Clampingunit stroke: 1000mm   3. Die Head Typeof die head: Double lays head of accumulator. Max mouth diameter: 180-400MM Max.Storage volume: 20L Typeof temperature sensors: K Heaterpower: 52KW 100point WPS systerm controller (B&R)   4. Extruder System Extrudershould be adequate to work with HDPE Screwdiameter: 120/30D Nitridetreatment barrel and screw. Plasticizingefficiency: 400 kg/h (HDPE) Feedingzone grooved with cooling water Cast-aluminium heater, adopt European mode ofconnection Typeof temperature sensors: DC motor drive: 132KW Coolingby 5 cooling fans. Raw material hopper with awindow.   5.BlowSystem Blowsystem mounted on linear guide under the mold. Heightadjustment mechainsm 250 mm Blow pin up/down stroke: 150 mm , controlledby hydraulic cylinder Parison closed Mechanical adjustment for left and right   6. Take out system Takeout stroke 1600 mm Adopt lear guide and synchronous belttransmission of motor to advance and retreat Gripper with the function: auto coolingwater   7. Hydraulic System Hydraulic working pressure  100 -150 bar Hydraulicsystem servo pump : 220 L/min Hydraulicvalves:Yuken brand Oil Temperature sensor showing the screen Motor power: 22KW Servosystem Servovalve: (REXROTH--FromGermany) Servooil source:4KW Pistonpump:YUken (YUKEN--From Japan) Threads ofhydraulic block use of screw joint GE(ISO 1179)   8. Pneumatic System Pneumaticcylinders AIRTEC Pneumatic valves AIRTEC Max. pressure of all components: 10 bar Max. pressure of gauge: 6-8bar   9.Control System ControlSystem:B&R B&R100point. ServoWDS control system: B&R100point. Full color 12.4" Fullcolor 12.4"  screen. Recipeand machine data storage on memory stick (CF) Emergencystop push buttons (rotationally release) without key Allelectric components needs to be for power supply 220V/380V, 50Hz, controllerDC24V, Total rated power: 276 KW Average energy consumption: 110 KW Main components(Air switch, Contactor) :Schneider intermediate relay: Schneider Invertot of extuder motor: PARK Linear transducer: Gefran Proximity switch:Schneider   Cooling water Allpipes for cooling water made of rubber material. Separatecooling water circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling. Waterconsumptions: 20m3/h   11.Machine frame Clamping unit  should beforward: 600 mm, for mold changing Aluminum profiles for safety doors, with plastic window. Machinecolor: according requirement of customer Overall dimensions ofmachine LxWxH: 5.5 x 6.5 x 3.6 m  Advantages of Rotary Automatic Stretch-Blow Molding Machines High productivity: 1700pcs/cavity/hour High eligible rate: above 99.6% Adopting SIMENS electric controlling system; with high precision and fast speed Stable function: Blowing system adopts Germany valve and cylinder, which has stable and accurate stretching speed and good product consistency Heating system adopts PHILIPS original infrared lamps, which is good in thermal properties and high in durability. Mold fixing structure assures fast mold fixing speed and fast mold changing speed Automatic plastic loader and automatic recovery device.  

Large Multi Layerbucket Blow Molding Machine
Blow Mold
Blow Molding Machine Head

News

History of blow molding

The process principle comes from the idea of glassblowing. Someone produced a blow molding machine and sold it to Hartford Empire Company in 1938. This was the beginning of the commercial blow molding process. During the 1940s the variety and number of products was still very limited and therefore blow molding did not take off until later. Once the variety and production rates went up the number of products created followed soon afterwards. The technical mechanisms needed to produce hollow bodied workpieces using the blowing technique were established very early on. Because glass is very breakable, after the introduction of plastic, plastic was being used to replace glass in some cases. The first mass production of plastic bottles was done in America in 1939. Germany started using this technology a little bit later, but is currently one of the leading manufacturers of blow molding machines. In the United States soft drink industry, the number of plastic containers went from zero in 1977 to ten billion pieces in 1999. Today, even a greater number of products are blown and it is expected to keep increasing. For amorphous metals, also known as bulk metallic glasses (BMGs), blow molding has been recently demonstrated under pressures and temperatures comparable to plastic blow molding.
more

Send Inquiry

Your message must be between 20-3000 characters